background image

4

2

Safe  

Operation 

Practices

Training

1.  Read, understand, and follow all instructions on the ma-

chine and in the manual(s) before attempting to assemble 
and operate. Keep this manual in a safe place for future 
and regular reference and for ordering replacement parts.

2.  Be familiar with all controls and their proper operation. 

Know how to stop the machine and disengage them 
quickly.

3.  Never allow children under 16 years old to operate this 

machine. Children 16 years old and over should read and 
understand the operation instructions and safety rules in 
this manual and should be trained and supervised by a 
parent.

4.  Never allow adults to operate this machine without proper 

instruction.

5.  Keep bystanders, helpers, pets, and children at least 

75 feet from the machine while it is in operation. Stop 
machine if anyone enters the area.

6.  Never run an engine indoors or in a poorly ventilated area. 

Engine exhaust contains carbon monoxide, an odorless 
and deadly gas.

7.  Do not put hands and feet near rotating parts or in the 

feeding chambers and discharge opening. Contact with 
the rotating impeller can amputate fingers, hands, and 
feet.

8.  Never attempt to unclog either the feed intake or dis-

charge opening, remove or empty vacuum bag, or inspect 
and repair the machine while the engine is running. Shut 
the engine off and wait until all moving parts have come 
to a complete stop. Disconnect the spark plug wire and 
ground it against the engine.

Preparation

1.  Thoroughly inspect the area where the equipment is to 

be used. Remove all rocks, bottles, cans, or other foreign 
objects which could be picked up or thrown and cause 
personal injury or damage to the machine. 

2.  Always wear safety glasses or safety goggles during opera-

tion or while performing an adjustment or repair, to protect 
eyes. Thrown objects which ricochet can cause serious 
injury to the eyes.

3.  Wear sturdy, rough-soled work shoes and close-fitting 

slacks and shirts. Loose fitting clothes or jewelry can be 
caught in movable parts. Never operate this machine 
in bare feet or sandals. Wear leather work gloves when 
feeding material in the chipper chute.

4.  Before starting, check all bolts and screws for proper tight-

ness to be sure the machine is in safe working condition. 
Also, visually inspect machine for any damage at frequent 
intervals.

5.  Maintain or replace safety and instructions labels, as 

necessary.

6.  To avoid personal injury or property damage use extreme 

care in handling gasoline. Gasoline is extremely flammable 
and the vapors are explosive. Serious personal injury can 
occur when gasoline is spilled on yourself or your clothes 
which can ignite. Wash your skin and change clothes 
immediately.

  a.  Use only an approved gasoline container.
  b.  Extinguish all cigarettes, cigars, pipes, and other 

sources of ignition.

  c.  Never fuel machine indoors.
  d.  Never remove gas cap or add fuel while the engine is hot 

or running.

  e.  Allow engine to cool at least two minutes before refuel-

ing.

  f.  Never over fill fuel tank. Fill tank to no more than 1/2 

inch below bottom of filler neck to provide space for fuel 
expansion.

  g.  Replace gasoline cap and tighten securely.
  h.  If gasoline is spilled, wipe it off the engine and equip-

ment. Move machine to another area. Wait 5 minutes 
before starting the engine.

  i.  Never store the machine or fuel container inside where 

there is an open flame, spark, or pilot light (e.g. furnace, 
water heater, space heater, clothes dryer, etc.).

  j.  To reduce a fire hazard, keep machine free of grass, 

leaves, or other debris build-up. Clean up oil or fuel 
spillage and remove any fuel soaked debris.

  k.  Allow machine to cool at least 5 minutes before storing.

WARNING:

 Engine Exhaust, some of its constituents, and certain vehicle compo-

nents contain or emit chemicals known to State of California to cause cancer and 
birth defects or other reproductive harm.

WARNING

This symbol points 
out important safety 
instructions which, if 
not followed, could 
endanger the personal 
safety and/or property 
of yourself and others. 
Read and follow all 
instructions in this 
manual before at-
tempting to operate 
this machine. Failure 
to comply with these 
instructions may result 
in personal injury. When 
you see this symbol. 

HEED ITS WARNING!

Your Responsibility 

Restrict the use 
of this power machine 
to persons who read, 
understand 
and follow the warnings 
and instructions 
in this manual 
and on the machine. 

DANGER:

 This machine was built to be operated according to the rules for safe operation in this 

manual. As with any type of power equipment, carelessness or error on the part of the operator can 
result in serious injury. This machine is capable of amputating hands and feet and throwing objects. 
Failure to observe the following safety instructions could result in serious injury or death.

Summary of Contents for 24B-060F766





















Reviews: