background image

8

4

Operating 

Your Yard 

Vacuum

Now that you have set up your yard vacuum for opera-
tion, get aquainted with its controls and features. These 
are described below and illustrated on this page. This 
knowledge will allow you to use your new equipment to 
its fullest potential. 

WARNING: The operation of any 
chipper shredder can result in foreign 
objects being thrown into the eyes, 
which can damage your eyes se-
verely. Always wear the safety glasses 
provided with this unit or eye shields 
while operating or while performing 
any adjustments or repairs.

Chipper Chute

Allows twigs and small branches up to 1-1/2” in diameter 
to be fed into the impeller for chipping. See Figure 7.

Nozzle Height Adjustment Lever

Used to adjust the nozzle ground clearance ranging 
approximately 5/8” to 4 1/8”. See Figure 7.

Nozzle

Yard waste such as leaves or pine needles can be 
vacuumed up through the nozzle for shredding.

Hose Assembly

Used as an alternative to the nozzle to vacuum yard 
waste such as leaves or pine needles in hard to reach 
places. See Figure 7.

Nozzle/ Hose Vac Lever

The nozzle/hose vac handle is located on top of the 
nozzle. Use it to switch vacuum suction between the 
nozzle and the hose assembly. See Figure 7.

Hose Handle

Used to guide hose assembly when vacuuming.

Bag Handle

Used to grasp bag in order to assist in attaching, remov-
ing, and emptying bag. See Figure 7.

Bag

Collects shredded material fed through the chipper chute 
or vacuumed through the nozzle or hose.

Starter Handle

The starter handle is attached to the right upper handle. 
Stand behind unit and pull the starter handle to start 
engine. See Figure 7.

Engine Controls

See the separate engine manual for the location and 
function of the controls on the engine.

WARNING

The operation of 
any chipper shred-
der can result in 
foreign objects 
being thrown into 
the eyes, which can 
damage your eyes 
severely. Always wear 
the safety glasses 
provided with this 
unit or eye shields 
while operating or 
while performing 
any adjustments or 
repairs. 

Figure 7

Know Your Yard Vacuum

�������������

����������

��������������

��������

���

������

�������������

����

��������

����

������

�������������

����������������

�����������

���������

Summary of Contents for 24B-060F766





















Reviews: