Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 87 / 247

5–2
GAUGE SETUP MENU
The Model 3451 software groups all the setup features in the
Gauge Setup
menu. To access the
Gauge Setup
menu, press
the
〈
Gauge Settings
〉
button on the main menu (see Figure 3–11
on page 3–18). The PDA displays the Change Settings menu
shown in Figure 5–1. Press the
〈
Gauge Setup
〉
button to display
the Gauge Setup menu shown in Figure 5–2.
To select a menu option, press the button that corresponds to the
option. Press the
〈
Done
〉
button to return to the main menu. The
following sections describe the setup options.
NOTE
Most of the setup options described in the following
sections are configured by the setup wizard during the
creation of a new project (see page 3–19). If the operator
later changes any of the gauge settings using the
Gauge
Setup menu, those changes will be saved in the active
project file.
Figure 5–1. Change
Settings Menu
Figure 5–2. Gauge
Setup Menu