Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 53 / 247

3–18
When all of the checks performed at power on are complete, the
RoadReader Plus software displays the main menu shown in Figure
3–11). From this menu, the operator can take a reading or standard
count, change the gauge settings, or access a set of gauge tools.
The main menu also displays the measurement mode ( Soil , Asphalt ,
or Thin Layer ), count time ( 15 seconds , 1 minute , or 4 minutes ), and
the selected project name (if any).
Before taking measurements, read this manual carefully. If you do
not completely understand the sections that cover radiation safety,
contact your company radiation safety officer (RSO) or the nearest
Troxler representative.
NOTE
Pressing the
〈
Exit
〉
button on the main menu shuts down
the RoadReader Plus software and commands the gauge
to power off.
Figure 3–11. RoadReader Plus Software Main Menu