Trox BVD F600, Installation And Operation Manual

Page: 59 / 64

BVD – installation manual for replacing the motor
Fig. 42: BVD
1. Disconnect
2. Disconnect the electric connecting cable (/20) from the terminal box (isolator if required, neither displayed).
3. Remove the closing ring (/9).
4. Remove the outside spacer ring (/8),
5. Remove the eye nuts.
6. Remove the rain hood (/10) (cut open the seal beforehand).
7. 7. Remove the mineral wool (/21), cover and cooling-air duct (/19).
8. Remove the inside spacer ring (/15),
9. Remove the inner ring (motor compartment).
10. Remove the screws and mounting rods
11. Disconnect the electric connecting cable (/20) from the terminal box of the motor.
12. Remove the fixing plate (/3) with the motor (/1) and impeller (/2).
13. Remove the crankshaft locking clip and pull off the impeller (/2).
14. Remove the fixing plate (/3).
15. Clean the crankshaft on the new motor (/1).
16. Attach the fixing plate (/3) again.
17. Fit the impeller /(2) and secure it again with the crankshaft locking clip.
Installation manuals
Centrifugal roof fans DRH; DRV; DRVF; DRVF-H; BVD; BVD(F600) 59