Trox BVD F600, Installation And Operation Manual

Page: 55 / 64

D Installation manuals
DRH – installation manual for replacing the motor
Fig. 39: DRH
1. Disconnect!
2. Disconnect the electric connecting cable from the isolation switch (terminal box if required, neither displayed).
3. Remove the eye nuts.
4. Remove the rain hood (Fig. 39/10).
5. Remove the outlet grille (Fig. 39/8).
6. Remove the screws and hexagon bolts (Fig. 39/12).
7. Remove the fixing plate (3) with the motor (Fig. 39/1) and impeller (Fig. 39/2).
8. Insert the rotor replacement set.
9. Screw the screws and hexagon bolts back into place.
10. Check the rotation of the rotor.
11. Make sure the gap is even.
12. Attach the outlet grille (Fig. 39/8).
13. Attach the rain hood (Fig. 39/10).
14. Screw on the eye nuts with sealing washers.
15. Re-establish the electrical connection.
16. Check the direction of rotation and power consumption.
WARNING!
The motor and impeller must not be detached from each other or separated.
Installation manuals
Centrifugal roof fans DRH; DRV; DRVF; DRVF-H; BVD; BVD(F600) 55