Trox BVD F600, Installation And Operation Manual

Page: 58 / 64

16. Fit the impeller Fig. 41/(2) and secure it again with the crankshaft locking clip.
17. Screw the screws and mounting rods in again.
18. Check the rotation of the rotor.
19. Make sure the gap is even.
20. Disconnect the connecting cable (Fig. 41/20) from the terminal box of the motor.
21. Mount the inside spacer ring (Fig. 41/15).
22. Mount the cooling-air ducts (Fig. 41/19) and feed the connecting cable (Fig. 41/20) through to the outside.
23. Attach and seal the rain hood (Fig. 41/10).
24. Screw on the eye nuts with sealing washers.
25. Seal the cooling-air ducts (Fig. 41/19) and inside spacer ring (Fig. 41/15).
26. Mount the outside spacer ring (Fig. 41/8).
27. Mount the closing ring (Fig. 41/9).
28. Re-establish the electrical connection.
29. Seal the cooling-air ducts (Fig. 41/19) and outside spacer ring (Fig. 41/8).
30. Check the direction of rotation and power consumption.
Installation manuals
Centrifugal roof fans DRH; DRV; DRVF; DRVF-H; BVD; BVD(F600) 58