Correct use requires that both the transmitter
module and the receiver module are placed in the
same duct system, i.e. either in the supply air duct
or in the extract air duct. FAM-RD must not be used
outdoors.
Residual risks
A power failure will interrupt data transmission. If a
system has to be highly reliable and available, you
should take backup measures to prevent problems
in case of a power failure.
Also, the radio communication between the various
nodes of an X-AIRCONTROL system can be inter-
rupted by interference. This, too, may lead to trans-
mission losses.
If a system has to be highly reliable and available, a
wired connection is the better option for data trans-
mission.
Incorrect use
Do not use the product for areas of application that
are not described in this manual.
Do not use the product:
outdoors
in wet areas
in areas with potentially explosive atmospheres
Dangers and risks
NOTICE!
Risk of damage to property due to large tem-
perature differences
If any electronic components have been kept in
an unheated area, condensation may form and
damage the electronic components beyond
repair.
–
Before you start commissioning, make sure
that all devices have warmed up to the
ambient temperature. Only after about
2 hours will the system have reached
ambient temperature.
NOTICE!
Risk of damage to property due to foreign
matter and liquids!
Foreign matter and liquids that get into the unit
may damage the electronic parts.
–
Remove foreign matter, if any.
–
If the device emits a smell or smoke, have it
checked by the manufacturer.
–
If liquid gets into the module, let the module
completely dry before commissioning.
NOTICE!
Risk of damage to property!
Over tightening the fixing screws may damage
the device.
–
Tighten the screws only finger-tight.
Qualified staff
The work described in this manual has to be carried
out by individuals with the qualification, training,
knowledge and experience described below:
Skilled qualified electrician
Skilled qualified electricians are individuals who
have sufficient professional or technical training,
knowledge and actual experience to enable them to
work on electrical systems, understand any poten-
tial hazards related to the work under consideration,
and recognise and avoid any risks involved.
Delivery and storage
Supply package
Check delivered items immediately after arrival for
transport damage and completeness.
Supply package
FAM-RD
Antenna
Antenna cable, 50 cm long
Antenna mounting bracket
Installation and operating manual
Delivery and storage
X-AIRCONTROL FAM-RD
5
Summary of Contents for X-AIRCONTROL
Page 10: ...X AIRCONTROL FAM RD 10...
