Fig. 26: Installation of sound attenuator TX H = 100 mm
1
VAV terminal unit TVJ-* / TVT-*
2
Sound attenuator TX
3
Splitter at bottom (TX behind TVJ / TVT in airflow
direction)
4
Splitter at top (TX in front of TVJ / TVT in airflow
direction)
5
Air terminal device (room end)
For sound attenuators with a height of H = 100 mm,
observe the position of the splitter (top or bottom).
Fig. 27: Detail X
1
VAV terminal unit TVJ-* / TVT-*
2
Sound attenuator TX
3
Seal (to be provided by others)
4
4 screws / washers / nuts M8 or M10 (to be provided
by others)
5
4 washers / screws / M8
×
16 (to be provided by
others)
Secondary silencer TS
Fig. 28: Installation of sound attenuator TS
1
VAV terminal unit TVZ, TVA, TZ-/TA-Silenzio, TVM
2
Sound attenuator TS
3
Seal (to be provided by others)
4
4 screws M8
×
16 (to be provided by others)
5
Room end
Installation
Affixing/suspension > Installation of secondary silencer
VAV terminal units VARYCONTROL
21
