6
Fancoil TFCU Series
Unit Identification
① Housing
It contains all the unit components.
Choose from galvanised sheet steel as
standard or the optional painted finish.
② Coil
Coils are made of galvanised sheets,
copper tubes and aluminium fins, and feature
purging and draining valves. Depending on
the model, it may be formed with a single coil
or with a cooling coil plus a heating coil.
③ Fan motor group
Has one or two fans depending on the
model. They are double-inlet centrifugal fans,
dynamically balanced and designed for high
performance and low noise levels.
The fan is made of synthetic material
with self-lubricated bearings, driven by
single-phase EC motors, with an adjustable
voltage of 0–10 V, Class B insulation and
built-in thermal overload protection.
④ Filter
For the TFCUs, the filters can be accessed
for maintenance from the rear or from either
side.
For the TFCUPs, the filter should be
accessed for maintenance from the
connections side.
⑤ Fan access cover
Screwed-on cover to access the fan section.
⑥ UV lamp (only in TFCUP)
Supplied as an optional extra in the TFCUP
range. Fitted with independent terminal strips
to supply the lamp at 230 V/I/50 Hz.
⑦ Filter access window
For removing the filter.
⑧ Condensates tray
Screwed from the exterior, it can be easily
disassembled for cleaning.
⑨ Electrical connections box
It contains fast connection terminals for 0 V,
0–10 V, 10 V power (line L, neutral N and
earth and for control), and Tacho for fans
with a tachometer for measuring rotation
speed.
⑩ Cold and/or hot water
connections
The water inlet should be via the lower
headers and the outlet via the upper headers.
There is only one coil for 2T installations,
and two coils for 4T installations.
The connections closest to the air inlet are for
cold water, while the connections closest to
the air outlet are for hot water.
⑪ Connection nozzle
For connecting the induction tube,
integrated in the unit’s housing.
Unit Identification