Fixing EP end plates
Fig. 10: EP end plate without and with extended
border
Fixing EA end angles
Fig. 11: EA end angle without and with extended
border
Single diffusers are factory fitted with end plates or
end angles. For a continuous linear arrangement,
they must be fitted by others. The end plates or end
angles must be fitted with screws (Fig. 10/1 and
Fig. 11/1).
Connecting corner sections
Fig. 12: Fitting a corner section with extended
border
Corner sections are supplied with two alignment
plates.
Installation in panelled ceilings
Fig. 13: Installation without extended border into a
ceiling with rectangular panels; required length of
installation opening when an end plate is used:
L1 + 9
Assembly
Air diffusers Slot Diffusers Type PURELINE50
8
