background image

Installation manual for automatic extract air valve

2

Contents

1.  General information 

2

2.  Safety and correct use 

3

 

General safety notes 

3

  Standards and guidelines 

4

  Repair and replacement parts 

4

  Environmental protection / disposal
  Staff qualifications 

4

  Limitation of liability 

4

  Personal protective equipment 

4

  Correct use 

4

3.  Transport, storage and packaging 

5

  Delivery check 

5

  Transport on site 

5

 Storage 

5

 Packaging 

5

4.  Product description 

6

  Functional description 

6

  Special features HFA 

6

 Dimensions 

6

5.  Technical data 

7

6. Installation 

7

 Components 

7

 Installation 

7

  Fixing the automatic extract air valve 

7

  On-site precautions 

8

7.  Electrical installation 

8

  Electrical connection 

8

  Connection diagram 

8

8. Commissioning

 9

  Setting the volume flow rates 

9

  Performance diagram HFA 

9

9. Maintenance 

10

  Maintenance and cleaning 

10

1.  General information

This installation manual describes the automatic extract air 
valve type:

HFA

To ensure correct functioning of the automatic extract air valve, 
it is essential to read the provided installation manual before 
starting any work, and to comply with it. The manufacturer 
does not accept any liability for any malfunction or damage 
resulting from non-compliance with these instructions or non-
compliance with relevant statutory regulations. This installation 
manual is intended for specialist consultants, developers, and 
owners of the ventilation systems in which the automatic ex-
tract air valve is to be installed. This installation manual is also 
intended for people conducting the following work:
-  Transport and storage
- Installation
-  Electrical connection
- Commissioning
- Maintenance
- Cleaning

For details on HFA, see: 
-  Brochure L-07-2-01d

The installation manual and the brochure can be downloaded 
from
www.troxhesco.com.

 

Summary of Contents for HESCO HFA











Reviews: