6
BE-LCD-01 Operating and Installation Manual / Leaflet no. M375EV8 (01/2015)
Technical data
Supply voltage
24 V AC/DC from TCU3 controller or TAM adapter module
Connecting cable
Approx. 5 m standard network patch cable, SF-UTP, extendable to 40 m
Acceptable temperature range
for storage: -10°C to +70 °C
for operation: 0°C to +50 °C
Acceptable humidity for storage and
operation
<90% non-condensing
Protection level
IP20
Dimensions
145 × 111 × 23 mm
Structural depth
Approx. 60 mm when the adapter is used
28 mm when mounted to a wall or to furniture
Casing
ABS plastic, pearl light grey (RAL 9022); front plastic: anthracite grey
(RAL 7016)
Functional description
The BE-LCD-01 control panel is used to display
and control the most critical aerodynamic functions
of a fume cupboard or a room. Users obtain
information regarding the condition of the fume
cupboard or room and can select among various
operating modes. The individual display elements
and controls are as follows:
• Three-colour status display
• Warning display
• 40-character display
• Alarm sounder
• Eight function button fields
– Acoustic alarm acknowledgement
– Three operating mode buttons
– Two buttons for the automatic sash device or
sun protection (depending on application)
– One button for the fume cupboard lighting
– One button for manual control
• Service socket
The range of functions of the control panel can be
adapted to project-specific requirements using the
EasyConnect configuration software. The range of
functions may vary for different fume cupboards or
rooms.
The function button fields are used for display and
as buttons for operation.
The available functions are highlighted (blue).
The required function can be selected by pressing
the appropriate button.
• Selection of the operating mode
• Automatic sash device
• Control of the fume cupboard lighting
The 40-character display shows system messages
or, if enabled, current values.
The control panel is connected to the EASYLAB
controller using a plug-in connection cable.
The control panel consists of a front panel with the
display elements and controls, the electronics, and
the pluggable adapter that provides four different
viewing angles. The control panel can be mounted
onto the side frame of a fume cupboard (using the
adapter) or to a wall or furniture.
The control panel is part of the EASYLAB system.
The functions described in this manual are only
available with the corresponding controllers and
possibly additional components.
Detailed information on design and areas of
application can be found on our website and in
the LABCONTROL design manual.
Functional description and technical data
3 Product description