14
EN
vaccum cleaner VC 150 E / VC 155 E
3. Take out the brush roller (
33
) and manually remove any
soiling. Observe that the brush roller (
33
) must only be
cleaned in dry condition.
33
4. Re-insert the clean brush roller (
33
). In doing this, start
with the opposite side of the latch fastening.
5. Insert the latch (
31
) and close it again until it engages
audibly.
Disassembly
Battery removal and disposal
1. Completely discharge the battery by letting the device run
until the motor stops.
2. Loosen the 3 screws at the battery case (
34
).
3. Open the battery case (
34
).
4.
Version A (without plug connection):
Hold onto the
battery (
35
) and disconnect the wiring by means of a wire
cutter. Insulate the severed wire ends of the battery with
tape to prevent a short circuit.
Version B (with plug connection):
Hold onto the
battery (
35
) and disconnect the plug connections of the
wiring.
34
34
35
5. Dispose of the battery and the device as described in the
Disposal chapter.
