8
EN
wet and dry vacuum cleaner VC 1200W
Proceed as follows to remove the hose (
1
):
1. When connected, turn the end of the detergent pipe (
2
) in
counter-clockwise direction and remove the detergent pipe
from the fitting (
22
) (
I
.).
2. Turn the hose (
1
) in counter-clockwise direction and,
depending on the application, remove it from the air intake
opening (
6
) or air outlet opening (
3
) (
II.
).
II.
I.
3
1
2
6
22
Utilising suction pipes
To extend the reach, you can connect one or two suction pipes
to the hose.
1. Attach the suction pipe (
12
) to the suction end of the
hose (
1
) with the connection side (
I.
).
2. Press the locking button (
24
) on the suction pipe.
3. Insert the end of the detergent pipe (
2
) into the fitting and
let go of the locking button (
24
) (
II.
).
I.
II.
III.
1
12
2
IV.
24
4. If required, attach the second suction pipe (
12
) to the
suction end of the first suction pipe (
12
) with the
connection side (
III.
).
5. To do so, press the locking button (
24
) on the lower
suction pipe and plug the two pipes together so that they
interlock (
III
.)
6. Let go of the locking button (
24
) (
IV
.).
Proceed as follows to remove the suction pipes:
1. Press the locking button (
24
) on the lower suction pipe (
I
.)
and draw the suction pipes apart (
II
.).
2. Press the locking button (
24
) on the upper suction pipe and
remove the detergent pipe (
2
) from the fitting (
III
.).
3. Remove the upper suction pipe (
12
) from the suction end
of the hose (
1
) (
IV.
).
I.
II.
III.
1
12
2
IV.
12
24