EN
11
wet and dry vacuum cleaner VC 1200W
8. Close the locks (
5
) on both sides of the device.
27
5
5
I.
II.
7
Inserting the dust bag
Note
Only use the dust bag to vacuum dry dirt! When the
dust bag comes into contact with liquid, it will be
damaged.
1. Open the locks (
5
) on both sides of the device.
2. Remove the device head (
27
) from the collection
container (
7
).
3. Unfold the dust bag (
18
) and place it into the collection
container (
7
).
4. Take hold of the dust bag (
18
) at the mount (
25
) and, with
its opening, carefully draw it over the inner piece of the
suction pipe (
26
).
ð
Draw the dust bag (
18
) over the pipe until it touches the
wall of the collection container (
7
).
I.
II.
18
7
26
25
5. Fit the device head (
27
) on the collection container (
7
).
6. Close the locks (
5
) on both sides of the device.
Proceed as follows to remove the dust bag (
18
):
1. Open the locks (
5
) on both sides of the device.
2. Remove the device head (
27
) from the collection
container (
7
).
3. Take hold of the dust bag (
18
) at the mount (
25
) and
carefully remove it from the inner piece of the suction
pipe (
26
).
4. Remove the dust bag (
18
) from the collection container (
7
).
ð
Make sure that no dirt falls out of the opening of the
dust bag when you remove it.
I.
II.
18
7
26
25
5. Fit the device head (
27
) on the collection container (
7
).
6. Close the locks (
5
) on both sides of the device.
Filling the detergent tank
Note
Make sure that the detergent is suitable for the surface
to be cleaned.
Always use detergents sparingly in terms of
environmental protection.
Note
Viscous detergent can block the device's pump.
Dilute viscous detergent with water.
1. Open the cover of the detergent tank.