12
EN
hand-held vacuum cleaner VC 10-20 V
Cleaning the dust filter
Please proceed as follows to clean the dust filter:
1. Remove the dust filter (
7
) from the collection container (
5
).
2. Pull the filter bag with the holding fixture (
20
) out of the
dust filter housing (
21
).
20
21
3. Remove coarse dirt and tap out the filter bag with the
holding fixture (
20
) and the dust filter housing (
21
).
4. If heavily soiled, rinse the filter bag with the holding
fixture (
20
) and the dust filter housing (
21
) with cold water.
Allow the dust filter to air-dry. Wait until the filter bag with
the holding fixture (
20
and the dust filter housing (
21
) have
completely dried before reinserting them into the collection
container.
5. Insert the filter bag with the holding fixture (
20
) into the
dust filter housing (
21
) as described under Connecting dust
filter and collection container.
6. Reinsert the dust filter (
7
) into the device as described
under Connecting dust filter and collection container.
Connecting dust filter and collection container
Before start-up, the dust filter needs to be reassembled and
inserted in the collection container (
5
). To do so, please proceed
as follows:
1. Connect the filter bag with the holding fixture (
20
) to the
dust filter housing (
21
).
21
20
ð
The dust filter (
7
) is now assembled and can be inserted
in the collection container (
5
).
2. Slide the dust filter (
7
) into the collection container (
5
) until
it is held securely by the integrated guides inside the
collection container (
5
).
7
5
ð
The collection container (
5
) may now be connected to
the motor housing (
3
).
Connecting motor housing and collection container
Before start-up, the motor housing (
3
) needs to be connected to
the collection container (
5
). To do so, please proceed as follows:
1. Fit the collection container (
5
) onto the motor housing (
3
) in
a way that the recess (
9
) at the bottom of the collection
container is seated on the tongue beneath the motor
housing.
2. Slide the collection container (
5
) onto the motor housing (
3
)
until the release button (
8
) snaps into place.
5
3
8
9
3. Check whether the collection container (
5
) is firmly seated
on the motor housing (
3
).
ð
Collection container (
5
) and motor housing (
3
) are
connected.
