EN
9
fan heater TFC 25 E
No.
Designation
Meaning
16
Decrease value
button
Set the desired room
temperature (5 °C to 35 °C) or
reduce the number of hours
when the timer is activated
17
Increase value
button
Set the desired room
temperature (5 °C to 35 °C) or
increase the number of hours
when the timer is activated
18
Timer/Temperature
button
Desired room temperature
(5 °C to 35 °C) and timer
function: Setting 1 h to 12 h in
increments of 1 h
19
ECO mode
button
Switching the ECO mode on or
off
20
Mode
button
Selecting the operating mode:
Heating function
Cold air operation
21
On/off
button
Switching the device on or off
22
ECO mode
LED
Is illuminated when the ECO
mode is activated
23
On/off
LED
Illuminated when the device is
switched on
24
Oscillation
LED
Is illuminated when the
oscillation function is activated
25
Segment display
Indication of the desired
temperature and/or the set
number of hours of the timer
Info
After approx. 60 seconds without any input, the display
is dimmed automatically.
Switching the device on
Once you have completely installed the device as described in
the chapter Assembly and start-up, you can switch it on.
1. Set the On/off switch (
7
) to position
I
.
ð
The device is now in standby mode.
2. Press the
On/Off
button (
21
).
ð
An acoustic signal is emitted.
ð
The target temperature set most recently will be
indicated on the display.
ð
At initial start-up, the target temperature is preset to 25
°C.
ð
The device is switched on.
Setting the operating mode
The device comes with the following operating modes:
•
Heating function
•
Cold air operation
•
Eco mode
Heating function
Please proceed as follows to set the heating function:
1. Press the
Mode
button (
20
) until the desired heating level
is illuminated.
ð
The heating level selected is activated and the device
starts to heat.
Cold air operation
Please proceed as follows to set cold air operation:
1. Press the
Mode
button(
20
) until the
Cold air
operation
LED (
14
) is illuminated.
ð
Cold air operation is activated.
ð
The fan is running.
Info
The temperature cannot be set in cold air operation.
Eco mode
Info
The preset temperature for the ECO mode is 22 °C.
ü
The device is switched on.
1. Press the
ECO mode
button (
19
) .
ð
The
ECO mode
LED (
22
) is lit.
ð
The device automatically operates at heating level 2 if
the room temperature is below 18 °C.
ð
The device automatically operates at heating level 1 if
the temperature is between 18 °C and 22 °C.
ð
The device stops heating automatically when the room
temperature is above 22 °C.
Note
The temperature settings cannot be changed in this
operating mode.
