EN
7
fan heater TFC 25 E
Assembly and start-up
Scope of delivery
•
1 x Fan heater
•
1 x Remote control
•
1 x Foot
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Warning
Risk of fire due to improper installation!
There is a risk of fire if the required minimum
distances are not observed.
Observe the “Installation” section in the “Assembly and
start-up” chapter and the technical data in the
“Technical annex” chapter.
Foot assembly
1. Place the device on its side.
2. Attach the foot (
4
) to the device from below, so that the
clips (
9
) of the device engage into the recesses of the foot.
9
4
3. Fold down the clips (
9
) so that the foot is locked.
9
4
4. Check the foot (
4
) for tight fit.
5. Set the device up in an upright and stable position.
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
When positioning the device, observe the minimum distance
from walls or other objects as described in the chapter
Technical annex.
A
B
C
C
D
