Trotec TDS DSP Operating Manual Download Page 4

4

EN

pressure switch TDS DSP

Improper use

The device is not suitable for the operation of irrigation systems
in business, industry or in public areas (e.g. park areas).
Using the device in swimming pools and the like is prohibited.
The device is not suitable for increasing the pressure of existing
water supply networks.
The device must not be used for aggressive, abrasive, caustic,
corrosive, combustible or explosive pumping media, e.g.:

brine

sandy water

food

cleaning agents

fuels (e.g. petrol, diesel)

oils

greases

petroleum

nitro-cellulose thinner

waste water from lavatories and urinal installations

The device must not be used at freezing temperatures.
Any unauthorised changes, modifications or alterations to the
device are forbidden.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when working with
electric devices in damp areas.

have read and understood the operating manual, especially
the Safety chapter.

Setting the switch-on pressure may only be carried out by
specialist companies for water installation.

Electrically skilled person

Electrically skilled personnel must be able to read and
understand electric circuit diagrams, to put electrical systems
into service and to maintain them, to wire control cabinets, to
ensure the functionality of electrical components and to identify
possible hazards from electrical and electronic systems.

Residual risks

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Warning of electrical voltage

Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.

Warning

Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!

Warning

The device is not a toy and does not belong in the
hands of children.

Warning

Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.

Note

If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.

Behaviour in the event of an emergency

1. In an emergency, disconnect the device from the mains

feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.

2. Do not reconnect a defective device to the mains.

Summary of Contents for TDS DSP












Reviews: