Trotec TDS 10 M, Original Instructions Manual

Page: 15 / 17

EN 15 ceramic heater TDS 30 M / TDS 50 M
Overview of spare parts and spare parts list TDS 50 M Note!
The position numbers of the spare parts differ from those
describing the positions of the components mentioned in these
instructions.
No. Spare part Specifications QTY
1 Switch knob PA 1
2 Temperature control
knob PA 1
3 Chimney PC/186C 1
4 Air duct PA66+30%GF 1
5 Out of the wind PA66+30%GF V0 1
6 The handle PA 1
7 MATS PP 1
8 Line pressing board PP 1
9 Line pressing plate PP 1
10 Net SPCC 1
11 The maple leaves clamp PA 1
12 Relay bracket SECC 1
13 Air duct stent SECC 1
14 The motor bracket SECC 1
15 cylindrical SECC 1
No. Spare part Specifications QTY
16 The base SECC 1
17 The blades Ø 300mm 0.7mm AL 1
18 The motor AC 380-400V 50 Hz 1
19 The power cord H07RN-F 4G 2.5 mm
2
*
1.6m
1
20 The plug 240/415V 16A 1
21 Rotary switch XK233-4/250V 15A 1
22 capacitance CBB61/0.8μF 50/60Hz
500V 1
23 Delay time limit of the
warm KSD301/250V/10A/K45 1
24 The thermostat 250V/16A/85 °C/T250 1
25 Limit the warm KSD301-V/250V/16A/
70 °C 1
26 PTC 220-240V 50Hz 4500W 1
27 Relay AC400V 25A T70 10E4 1
28 Fuse AC250V 10A TF=121 °C 1