3
Operating Manual – Air Cleaner TAC 1500 / TAC 3000
EN
Carefully read the operating manual before using the device
and keep it within reach!
• Do not use the device in potentially explosive rooms.
• Do not use the device in atmospheres containing oil, sulphur,
chlorine or salt.
• Set the device in an upright and stable position.
• Ensure that air inlet and air outlet are not obstructed.
• Never insert objects into the device.
• Do not cover or transport the device during operation.
• Ensure that all electric cables outside of the device are pro-
tected from damage (e.g. from animals).
• Only use extensions to the connecting cable which are appro-
priate to the device power consumption, the length of its ca-
ble and its use. Avoid electrical overload.
• Dispose of replaced filters properly.
• Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
• Observe the storage and operating conditions (see chapter
Intended use
Only use the device to clean atmospheric air whilst adhering to
the technical data.
Improper use
Do not place the device on damp or flooded ground. Any unau-
thorised changes,
modifications or alterations of the device are forbidden.
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with elec-
tric devices.
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Hazardous electric voltage!
Work on the electrical components must only be
carried out by an authorised specialist company!
Hazardous electric voltage!
Before any work on the device, remove the mains plug
from the mains socket!
Danger!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Danger!
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way.
Observe the personnel qualifications.
Caution!
To avoid damages to the device, never operate the device
without a filter inserted!
Transport
To make the device easier to transport, it is fitted with wheel.
Before transporting the device, proceed as follows:
1. Switch off the device.
2. Remove the mains plug from the mains socket. Do not use
the power cable to drag the device!
Storage
When the device is not being used, observe the following storage
conditions:
• dry,
• protected from dust and direct sunlight,
• with a plastic cover to protect it from invasive dust, if neces-
sary.
Safety
Transport and storage
