EN
4
Operating manual – cordless tacker PTNS 10-3,6V
•
Do not use this tacker for fastening electrical lines.
It is
not suitable for the installation of electrical lines, it could
damage the insulation of electric cables thereby causing
electric shock and fire hazards.
•
Use appropriate detection equipment to track down
concealed supply lines or consult the local utility
companies.
Contact with electrical lines may result in fire
and electric shock. Damaging a gas line may lead to an
explosion. Penetrating a water line causes property
damage and may cause an electric shock.
•
Do not under any circumstances use the power tool if
you detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, his service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding the
workpiece by your hand or against the body leaves it
unstable and may lead to loss of control.
Intended use
Only use the device
PTNS 10-3,6V
for tacking cardboard,
leather, insulating material, fabrics made of textile or natural
fibres, foils and similar materials onto a soft ground such as
softwood or material similar to wood whilst adhering to the
technical data.
We recommend using the power tool with original Trotec
accessories.
Improper use
The device
PTNS 10-3,6V
is not suitable for tacking hard
materials such as metals, stone materials, glass and hard
plastics.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
of the charger from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of explosive substances
Do not expose the battery to temperatures above
45 °C! Do not let the battery come into contact with
water or fire! Avoid direct sunlight and moisture. There
is a risk of explosion!
Warning
Make sure not to hit power, gas or water lines when
working with a power tool.
If necessary, use a pipe detector to check the wall you
want to drill in or slit open.
Warning
Risk of injuries caused by flying parts or bursting tool
heads.
