11
EN
Operating manual – cordless tacker PTNS 10-3,6V
5. Slide the magazine slider (5) back down alongside the
magazine (12) until it clicks into place.
5
12
Operation
Tips and notes on handling the tacker
Warning of sharp object
Wire nails and staples are sharp. Risk of injuries if
handled without due care!
General information:
•
Always apply the device to the workpiece firmly and at a
right angle. Otherwise the staple or wire nail could be
diverted sideways.
•
Be careful when using the device on soft workpieces. Else
the workpiece could be damaged.
•
Observe the size of staples and wire nails as specified in
the technical data.
•
At the magazine filling level indicator you can check
whether any staples or wire nails are left in the magazine.
•
Make sure not to hold the device by the trigger when a
staple or wire nail is jammed inside! The trigger could be
actuated by accident while removing a jammed staple or
wire nail.
•
The movable tacker guide nose also serves as safety
catch. It makes sure that a shot cannot be released
accidentally just by inadvertently pulling the trigger.
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Set the on/off switch (6) to
I
to switch the device on.
6
