EN
8
Operating manual – cordless drill driver PSCS 10-12V
Technical data
Parameter
Value
Model
PSCS 10-12V
Nominal voltage
12 V
Idle speed
1st speed level
2nd speed level
0 – 400 rpm
0 – 1300 rpm
Torque settings
19 +1
Chucking range
10 mm
Max. drilling diameter
Wood
Metal
20 mm
8 mm
Max. torque
22 Nm
Weight
1 kg
Battery
PSCS 10-12V DC
Type
Li-ion
Nominal voltage
12 V
Capacity
1500 mAh
Quick charger
PSCS 10-12V AC
Input
Nominal voltage
220 – 240 V ~ 50 Hz
Power input
45 W
Output
Nominal voltage
12.8 V
Charging current
2.0 A
Charging time
1 h
Protection class
II /
Sound values according to EN 60745
Sound pressure level
63.1 dB(A)
Sound power level
74.1 dB(A)
Uncertainty K
3 dB(A)
Vibration information according to EN 60745
Vibration emission value drilling in
metal / screwing ah=in
1.58 m/s
2
Uncertainty K
1.5 m/s
2
Information on noise and vibration:
•
The vibration level specified in these instructions was
determined by means of a measuring method standardized
in EN 60745 and can be used for a device comparison. The
specified vibration emission value may also be used for a
preliminary assessment of the exposure.
Caution!
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
•
The vibration level will change depending on the
application of the power tool and may in some cases differ
from the value specified in these instructions. The vibration
load may be underestimated if the power tool is used
regularly in such a way. For a precise estimation of the
vibration load during a certain work period, it is also
important to consider the periods during which the device
is switched off, or is running but not actually employed.
This can reduce the vibration load over the entire work
period significantly.
