11
EN
Operating manual – cordless drill driver PSCS 10-12V
Checking the battery status
The battery status is displayed as follows by the three LEDs of
the battery level indication (4):
LED colour
Meaning
Green – Orange – Red
maximum charge / power
Orange – Red
medium charge / power
Red
weak charge – Recharge the battery.
1. Press the on / off switch (14).
ð
You can read the battery status from the battery level
indication (4).
Changing tools
The device is equipped with a fully automatic spindle lock.
When the tool is at a standstill, the motor's drive train is locked
so that the keyless drill chuck can be opened. Please proceed
as follows to remove or insert tools:
1. Set the switch for clockwise / counter-clockwise rotation (5)
to centre position (lock).
2. Turn the keyless drill chuck (1) counter-clockwise to open
it.
3. If necessary, take the (drill) bit out of the drill chuck.
4. Insert the appropriate (drill) bit into the drill chuck.
5. Tighten the keyless drill chuck (1) by turning clockwise.
