EN
14
Operating manual – cordless multi-function tool PMTS 10-20V
Operating mode: Sawing / cutting
For separating and plunge-saw cuts in wood, plastic, plaster
and other soft materials as well as for sawing close to the edge
– also in poorly accessible areas.
•
Use the plunge-cut saw blade HCS CS 95/41.
For separating and plunge-saw cuts in tiles or other harder
materials.
•
Use the diamond saw blade T65.
Operating mode: Scraping
For removing material residues, e.g. tile adhesive when
replacing damaged tiles, and for treating any remainders of
mortar / concrete, tile / carpet adhesives, paint or silicone
residues.
•
Use the scraping knife HCS SC 80/31.
Operating mode: Sanding
For sanding wood and metal, removing paints and varnishes,
smoothing various surfaces.
•
Use the delta sanding plate with suitable sandpaper.
Applying sandpaper
The delta sanding plate is provided with a hook-and-loop
fastening system so as to allow a quick and easy attachment of
Velcro®-backed sanding sheets.
Please proceed as follows to attach the sandpaper to the
sanding plate:
1. Tap off the dust from the sanding plate's hook-and-loop
fabric to ensure optimum adhesion.
2. Mount the delta sanding plate to the tool holder.
3. Place the sandpaper with its smooth bottom side on the
delta sanding plate so that it fits exactly.
ð
The six holes should be aligned precisely.
4. Firmly press the sandpaper down.
5. To change or remove the sandpaper, pull it off from one
corner towards the opposite side.
Mounting the dust extraction system
Avoid the accumulation of dust at the workplace, always use the
dust extraction system when grinding.
Caution
Use a special vacuum cleaner to suck off harmful or
toxic materials.
1. Fasten the dust extraction system to the device before
inserting a tool.
2. Put the dust extraction system (10) on the device.
