EN
12
Operating manual – cordless multi-function tool PMTS 10-20V
3. Detach the clamping screw from the tool holder (15) by
turning it counter-clockwise.
15
4. Insert the required tool in the tool holder (15).
5. Affix the clamping screw to the tool holder (15) by turning
it clockwise.
15
6. Complete close the tool holder by means of the tool
release lever (1).
1
7. Check whether the tool is properly locked in place.
Oscillation rate selection
The required oscillation rate depends on the material and the
operating conditions and can be determined by way of field-
testing. For sawing, cutting and grinding harder materials such
as wood or metal we recommend oscillation rate
6
, in case of
softer materials, e.g. plastics, best use oscillation rate
4
. The
setting range covers the levels 1 - 6 (5,000 - 19,000 rpm). You
can change the preselected oscillation rate at any time.
1. Turn the setting wheel (3) to the desired oscillation rate.
3
