EN
23
cordless portable circular saw PCSS 10-20V
•
Remove dust and chips from the chip ejector. If the chip
ejector is blocked, clean it with suitable means (e.g.
compressed air).
•
Non-coated saw blades can be protected against corrosion
by applying a thin layer of acid-free oil. Remove any oil
before starting to saw to prevent oil residues from reaching
the wood.
Cleaning the lower guard
The lower guard should be cleaned before and after every
application. The lower guard must open and close freely at all
times and must not be blocked by material residues or similar.
•
Remove dust and chips by blowing out with compressed
air or by using a brush.
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. You can also find out about other return options
that apply for many EU countries on the website
https://hub.trotec.com/?id=45090. Otherwise, please contact an
official recycling centre for electronic and electrical equipment
authorised for your country.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
Li-Ion
In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.
Declaration of conformity
Declaration of conformity in accordance with the EC Machinery
Directive 2006/42/EC, Annex II, Part 1, Section A
We – Trotec GmbH – declare in sole responsibility that the
product designated below was developed, constructed and
produced in compliance with the requirements of the
EC Machinery Directive in the version 2006/42/EC.
Product model / Product:
PCSS 10-20V
Product type:
cordless portable circular saw
Year of manufacture as of:
2021
Relevant EU directives:
•
2011/65/EU: 01/07/ 2011
•
2012/19/EU: 24/07/2012
•
2014/30/EU: 29/03/2014
•
2015/863/EU: 31/03/2015
Applied harmonised standards:
•
EN 55014-1:2017
•
EN 62841-1:2015
•
EN 62841-2-5:2014
Applied national standards and technical specifications:
•
EN 55014-2:2015
Manufacturer and name of the authorised representative of
the technical documentation:
Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: [email protected]
Place and date of issue:
Heinsberg,
20.07.2021
Detlef von der Lieck, Managing Director