EN
15
cordless portable circular saw PCSS 10-20V
As standard, the device is supplied with a saw blade with
18 teeth (suited for wood and plastic). The saw blade is
preassembled.
Please proceed as follows to remove or insert a saw blade:
1. Remove the battery from the device.
2. Set the cutting depth to 0 mm.
3. Set the cutting angle to 0°.
4. Place the device on the front side of the motor housing.
5. Press and hold the spindle lock (
1
).
1
28
6. Loosen the clamping screw (
20
) by means of the Allen
wrench (
28
).
33
19
20
7. Let go of the spindle lock (
1
).
8. Remove the clamping screw (
20
) as well as the clamping
flange (
19
).
9. Remove any material residues from the device, in
particular from the lower guard.
10. Swing the lower guard (
18
) back using the retracting
lever (
22
) and hold the retracting lever in this position.
11. Remove the saw blade (
27
).
22
27
12. Check whether the saw blade clamp (
33
) is attached to the
device. If it has fallen out accidentally, reattach it.
13. Please note that the lower guard (
18
) must be swung back
using the retracting lever (
22
) in order to insert the saw
blade.