8
EN
air cooler PAE 29
4. Fill the water tank (3) with fresh drinking water only.
Optionally, you can add ice cubes made of drinking water
for additional cooling.
ð
Observe the minimum and maximum filling level at the
filling level indicator. The water tank must be filled up to
minimum filling level to enable pump operation.
5. If required, put the ice packs into the water tank (3) for
additional cooling.
6. Close the flap of the water funnel (7) or reinsert the
evaporation filter (9) and the air filter (10).
7. Make sure that the device is neither damp nor wet on the
outside. Otherwise wipe it dry.
Inserting evaporation filter and air filter
Note
When set to air cooling mode, the device should not be
operated without the evaporation filter, otherwise
cooling
will not work.
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
•
Make sure that both the evaporation and the air filter are
installed before switching the device on.
