EN
7
air cooler PAE 29
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Only put up the device in an upright, stable position on firm
ground.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
Prior to initial start-up, insert batteries in the remote control.
Filling the water tank
The device requires fresh drinking water for air cooling.
Note
Always attach the rubber stopper on the water outlet
before filling the device.
Note
Fill the device with fresh drinking water only. The
water temperature must not exceed 40 °C.
Info
If possible, change the water every 3 days to prevent
bacterial growth.
Info
Use the drip catcher (black sponge) in the designated
compartment in the water tank to avoid dripping
noises. Upon delivery the drip catcher is already
preassembled.
Observe the following when using the ice packs:
•
Put the ice packs into a freezer for at least 4 hours before
use.
•
Put the ice packs into the water tank before filling water
into the tank.
Info
When using ice packs at high outside temperatures,
condensation may form at the water tank and drip onto
the floor.
1. Disconnect the device from the mains before refilling water
or putting ice packs into the device.
2. Open the water funnel (7).
3. Ensure tight fit of the rubber stopper (8), for otherwise
there might be uncontrollable water leakage.
