Trotec PAE 20, Operating Manual

Page: 9 / 18

EN 8 Operating manual – air cooler PAE 20
Ventilation
In ventilation mode you can choose either of the 3 fan stages.
1. Press the
MODE button (13) until the NORMAL LED (14) for
ventilation is illuminated.
2. To adjust the fan stage, press the SPEED button (16) until
the LED for the desired fan stage (15) is illuminated.
Night mode
In night mode, it is possible to additionally switch on air cooling .
Night mode comes with the following settings:
After 0.5 h the fan speed will be decreased from high to
medium. After 1 h the fan speed will be decreased from
medium to low.
1. Press the
MODE button (13) until the SLEEP LED (14) for
night mode is illuminated.
Setting the timer
The automatic switch-off can be programmed in increments of
0.5 h within a range between 0.5 h and 7.5 h. The combination
of the LEDs (22) indicates the number of hours until automatic
switch-off.
ü
The device is switched on.
1. Press the TIMER button (21).
ð
The TIMER LED (22) for 0.5 h will be illuminated.
2. Press the TIMER button (21) again until the summed up
value of the LEDs (22) indicates the desired number of
hours.
ð The device switches off after the set number of hours
has elapsed.
3. To switch the timer function off, press the TIMER
button (21) again until the TIMER LEDs (22) go out.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
TIMER
SPEED
MODE
SWING
COOL
26
27
28
29
30
31
25
No. Designation Meaning
25 Remote control
transmitter/receiver For infrared transmission to the device
26 Power button Switching the device on and off
27 COOL button Switching the air cooling mode on and off
28 MODE button Selecting the operating mode:
night mode
air freshening
ventilation
29 SPEED button Selecting the fan stage: high, medium or low fan
speed
30 TIMER button Timer function Automatic switch-off in
increments of 0.5 h (0.5 h to 7.5 h)
31 SWING button Switching the swing function on and off
Swing function
The swing function can be switched on in any operating mode if
required.
Vertical air flaps are located in front of the horizontal ventilation
flaps. By means of the swing function, these air flaps are moved
automatically and thus ensure continuous air circulation.
1. Press the
WIND button (24) to switch on the swing function.
ð
The WIND LED (23) is illuminated.
2. Press the WIND button (24) again to switch the swing
function off.
ð
The WIND LED (23) goes out.