9
EN
Operating manual – air cooler PAE 20
Refilling water
An empty water tank is indicated by the device with an acoustic
signal and the flashing operating light (20). In this case, the
water tank must be refilled.
Disconnect the device from the mains before refilling water!
Notice
The water tank cannot be removed.
Do not attempt to remove the water tank for otherwise
the device could be damaged.
The device requires fresh drinking water for air cooling.
Observe the following when using the ice packs:
•
Put the ice packs into a freezer for at least 4 hours before
use.
•
The water tank (5) should be filled with water before
inserting the ice packs.
Notice
When using ice packs at high outside temperatures,
condensation may form at the water tank and drip onto
the floor.
1. Open the water tank (5).
5
2. Ensure the tight fit of the rubber stopper (5a), for otherwise
there might be uncontrolled water leakage.
5a
3. Fill the water tank (5) with fresh drinking water only.
Optionally, you can add ice cubes made of drinking water
for additional cooling.
ð
Observe the minimum and maximum filling level at the
filling level indicator.
The water tank must be filled up to minimum filling
level to enable pump operation.
MAX
MIN
4. Close the water tank (5) again.
5
Summary of Contents for PAE 20
Page 1: ...TRT BA PAE20 TC 001 EN PAE 20 EN OPERATING MANUAL AIR COOLER...
Page 17: ......