9
EN
Operating manual – infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200
Effective range
The device heats objects and persons inside a certain effective
range. This effective range differs depending on whether the
device is installed indoors or outdoors. In outdoor areas, the
effective range is influenced by the weather and may be
reduced.
a
b
c
d
a
Height
b
Depth
c
Width
d
Effective range
IRD 1200
IRD 1800
IRD 2400
IRD 3200
a
2.2 m
2.2 m
2.2 m
2.2 m
b
2.1 m
2.1 m
2.1 m
2.1 m
c (indoors) 1.9 m
2.4 m
2.95 m
3.55 m
d (indoors) approx.
4.0 m
2
approx.
5.1 m
2
approx.
6.2 m
2
approx.
7.5 m
2
c (outdoors) 1.55 m
1.95 m
2.35 m
2.75 m
d (outdoors) approx.
3.3 m
2
approx.
4.1 m
2
approx.
5.0 m
2
approx.
5.8 m
2
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are unrolled completely.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Prior to initial start-up, insert the batteries in the remote control.
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
Info
The device will only emit heat if the settings are made
via the remote control.
Display
20
21
19
No. Designation
Meaning
19 Operating light
Flashes red when the device has been
switched on via the on/off switch.
Is permanently illuminated in red when
the device has been switched on via the
remote control.
20 Timer LED
Is permanently illuminated in green
when the timer is active.
21 Segment display Heating level indication:
P0 = device in standby mode
P1 = level 1
P2 = level 2
P3 = level 3
Indication of the number of hours during
timer programming
Info
An acoustic signal is emitted each time a setting is
activated.
Summary of Contents for IRD 1200
Page 15: ......
