EN
3
oil heater IDS 30 F
Warning
Do not use the device in rooms if persons are present
who cannot leave the room independently and who are
not under constant supervision.
•
Do not use the device in potentially explosive rooms or
areas and do not install it there.
•
Do not use the device in aggressive atmosphere.
•
Only put up the device in an upright, stable position on firm
ground.
•
Let the device dry out after a wet clean. Do not operate it
when wet.
•
Do not use the device with wet or damp hands.
•
Do not expose the device to directly squirting water.
•
Never insert any objects or limbs into the device.
•
Do not cover the device during operation.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Attention: In Germany, the Federal Emission Protection
Directive applies. Do not operate the device for more
than 3 months at the same place. Prior to planning the flue
gas system, gather information about the national
legislation and contact a responsible specialist.
•
Do not sit on the device.
•
This appliance is not a toy. Keep away from children and
animals. Do not leave the device unattended during
operation.
•
Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.
•
Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
•
The mains connection must correspond to the
specifications in the Technical annex.
•
Insert the mains plug into a properly fused mains socket.
•
Observe the device's power input, cable length and
intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical
overload.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the power cable is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
annex.
•
Make sure that the air inlet and outlet are not obstructed.
•
Make sure that the suction side is kept free of dirt and
loose objects.
•
Do not place the device on combustible ground.
•
Only transport the device in an upright position.
•
Only use original spare parts, for otherwise safe and
functional operation cannot be ensured.
•
Do not store combustible materials near the
device (minimum distance 3 m).
•
Do not transport the device whilst the fuel line is
connected.
•
Take the necessary fire protection measures.
•
Only install the device in roofed outdoor areas or in well-
ventilated indoor spaces with exhaust system.
•
Only position the device near flue pipes or electrical supply
control panels that comply with the specified parameters.
•
Do not use the heating device together with a
programming device, a timer, a separate remote control
system or any other device that automatically switches the
heating device on, as there is a risk of fire if the heating
device is covered or incorrectly positioned.
