background image

EN

3

cross line laser BD7A

Intended use

Only use the device 

BD7A

 for the projection on non-reflective

surfaces as an aid to determine and check horizontal, vertical
and / or parallel lines. Observe and comply with the technical
data.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.

Improper use

Do not use the device 

BD7A

 in potentially explosive

atmospheres or in liquids. Never point it at people or animals.
Trotec accepts no liability for damages resulting from improper
use. In such a case, any warranty claims will be voided.
Any unauthorised modifications, alterations or structural
changes to the device are forbidden.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when working with
laser measuring devices.

have read and understood the operating manual, especially
the Safety chapter.

Residual risks

Warning of electrical voltage

There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Warning of explosive substances

Do not expose the battery to temperatures above 45
°C! Do not let the battery come into contact with water
or fire! Avoid direct sunlight and moisture. There is a
risk of explosion!

Warning of laser radiation
Laser class 2, P max.: < 1 mW, λ: 650 nm,
EN 60825-1:2014

Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class 2, observe the
national regulations on wearing eye protection.

Warning

Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.

Warning

The device is not a toy and does not belong in the
hands of children.

Warning

Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!

Caution

Keep a sufficient distance from heat sources.

Note

To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.

Note

Do not use abrasive cleaners or solvents to clean the
device.

Summary of Contents for BD 7A











Reviews: