Operating Manual – Electronic Humidifier
B -
8
EN
16. Menu programming
The B 500 Professional offers you the possibility of
changing the factory settings and making various set-
tings to meet your requirements .
Please proceed as follows:
1 . Press the „PROG” button on the remote control unit
„Prog“ .
2 . The number „10“ will appear on the control panel
display .
3 . Select one of the main menus (10, 20, or 30, see
table below) .
4 . Once your have reached the main menu you are
looking for, press the „SET” button to reach the re-
quired sub-menu, e .g . 11, 12, or 13 .
5 . Once your have reached the sub-menu you are loo-
king for, after a few seconds the display will flash
with a number such as 00, 01, or 98 . By pressing
the blue „Humidity“ button (%) you can increase
the figure with ‘+’ or decrease it with ‘-‘ .
6 . When you have made the necessary change, sim-
ply wait for about 10 seconds . After that the display
will jump back to the standard position (showing
relative humidity) and the changes will be saved .
m
If no more settings have been made for 10
seconds the display will jump back to the s
tandard position (showing relative humidi-
ty). The programming process can be termi-
nated at any time by pressing the ON / OFF
button. Please note, however, that this will
result in the loss of all the changes that have
been made.
Main
menu
Sub-
menu
Description
Setting
Comment
Factory
setting
10
Hooter setting
11
Hooter active when tank
empty
00 = OFF
01 = ON
01
12
Hooter active when UV
lamp is defective
00 = OFF
01 = ON
Only at version with
UV-C-technology
01
13
Hooter active with external
water sensor alarm
00 = OFF
01 = ON
With external sensor
01
14
Hooter active when tank
content >=50 liters
00 = OFF
01 = ON
(Only in combination with automatic
water supply)
01
15
Hooter active when no
radio signal
00 = OFF
01 = ON
01
20
Relay setting
21
Relay active when tank
empty
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system
00
22
Relay active when UV lamp
is defective
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system
00
23
Relay active with external
water sensor alarm
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system
00
24
Relay active when tank
content >= 50 Litre
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system
00