10
EN
air cleaner AirgoClean® 150 E
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
Cleaning the housing
Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Note
Clean the air outlet if required.
Remove it from the device and clean it with a soft,
damp and lint-free cloth.
Visual inspection of the inside of the device for dirt
1. Remove the air filter.
2. Use a torch to illuminate the openings of the device.
3. Check the inside of the device for dirt.
4. If you see a thick layer of dust, clean the inside of the
device with a vacuum cleaner.
5. Put the air filter back in.
Cleaning and replacing the prefilter with integrated
HEPA carbon filter
Note
Do not operate the device without an inserted prefilter
with integrated HEPA carbon filter!
Note
The HEPA carbon filter is not washable. Only the
integrated prefilter may be cleaned. Do not use water
or liquid cleaning agents to clean the 3-1 filter.
Note
The lifetime of the prefilter with integrated HEPA
carbon filter depends on the ambient conditions and
the application period of the device.
•
The prefilter with integrated HEPA carbon filter (
23
) has to
be changed or cleaned if dirt has been detected. This is
brought to light e.g. by a reduced capacity. Replace the
prefilter with integrated HEPA carbon filter after 6 months
at the latest (see chapter Errors and faults).
•
Make sure that the prefilter with integrated HEPA carbon
filter is installed before switching the device on.
•
Without the prefilter with integrated HEPA carbon filter, the
device cannot fulfil its air cleaner function, and the inside
of the device will be soiled.
The prefilter with integrated HEPA carbon filter (
23
) has to be
cleaned if the filter LED (
11
) is illuminated.
If required, visually inspect the prefilter with integrated HEPA
carbon filter for dirt.
1. Remove the air inlet (
6
) from the device.
6
