Trotec 3510205031 Original Instructions Manual Download Page 2

2

EN

moisture indicator BM31

Table of contents

Notes regarding the instructions  ......................................... 2

Safety ..................................................................................... 2

Information about the device................................................ 4

Transport and storage........................................................... 5

Operation ............................................................................... 5

Dielectric measurements ...................................................... 6

Maintenance and repair ........................................................ 8

Errors and faults.................................................................... 8

Disposal ................................................................................. 8

Notes regarding the instructions

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of
persons due to electrical voltage.

Warning

This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.

Caution

This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.

Note

This signal word indicates important information (e.g.
material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry
out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the
instructions must be observed.

You can download the current version of the instructions and
the EU declaration of conformity via the following link:

BM31

https://hub.trotec.com/?id=43574

Safety

Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use.

Warning
Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future
reference.

The device is supplied with warning signs. Prior to initial
start-up, make sure to paste the corresponding warning
signs in your local language over the ones present at the
rear of the device as described in chapter Operation.

Do not use the device in potentially explosive rooms or
areas and do not install it there.

Do not use the device in aggressive atmosphere.

Do not immerse the device in water. Do not allow liquids to
penetrate into the device.

The device may only be used in dry surroundings and must
not be used in the rain or at a relative humidity exceeding
the operating conditions.

Protect the device from permanent direct sunlight.

Do not expose the device to strong vibrations.

Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.

Do not operate the device near medical equipment (e.g.
pacemakers).

Do not open the device.

Do not operate the device near open electrical wiring.

Never charge batteries that cannot be recharged.

Different types of batteries and new and used batteries
must not be used together.

Insert the batteries into the battery compartment according
to the correct polarity.

Summary of Contents for 3510205031










Reviews: