EN
3
pyrometer controlled via smartphone BP21WP
•
Never short-circuit the supply terminal in the battery
compartment!
•
Do not swallow batteries! If a battery is swallowed, it can
cause severe internal burns within 2 hours! These burns
can lead to death!
•
If you think batteries might have been swallowed or
otherwise entered the body, seek medical attention
immediately!
•
Keep new and used batteries and an open battery
compartment away from children.
•
Observe the storage and operating conditions (see
Technical data).
Intended use
Use this device in combination with a terminal device that is
compatible with the installed Trotec MultiMeasure Mobile app.
Only use the device for temperature measurements by means of
an infrared sensor within the measuring range specified in the
technical data. Observe and comply with the technical data.
The Trotec MultiMeasure Mobile app on the terminal device is
used for both operation and the evaluation of the measured
values.
Data logged by the device can be displayed, saved or
transmitted either numerically or in form of a chart.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Foreseeable misuse
The device must not be pointed at people. Do not use the device
in potentially explosive atmospheres, for measurements in
liquids or on live parts.
Radio waves may interfere with the operation of medical
equipment and cause malfunctions. Do not use the device near
medical equipment or within medical institutions.
Persons with pacemakers must observe a minimum distance of
20 cm between the pacemaker and the device.
Also do not use the device near automatically controlled
systems such as alarm systems and automatic doors. Radio
waves may interfere with the operation of such equipment and
cause malfunctions. Make sure that no other devices are
malfunctioning during the use of your device.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
•
be aware of the dangers that occur when working with
laser measuring devices.
•
have read and understood the operating manual, especially
the Safety chapter.
Safety signs and labels on the device
Note
Do not remove any safety signs, stickers or labels from
the device. Keep all safety signs, stickers and labels in
legible condition.
The following safety signs and labels are attached to the device:
Warning of magnetic field
Information marked with this symbol indicates dangers
to the life and health of persons due to magnetic fields.
Disrupted operation or damage to pacemakers and
implanted defibrillators caused by the device
This symbol indicates that the device must be kept
away from pacemakers or implanted defibrillators.
Warning
sign
Meaning
The warning sign is located on the back of the
device and indicates that the device is equipped
with a class 2 laser.
The power is less than 1.0 mW. The frequency
range of the laser is 630 to 670 nm.
Do not look directly into the laser beam or the
opening from which the laser beam emerges!
Residual risks
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning
Magnetic field!
The magnet attachment can affect pacemakers and
implanted defibrillators!
Always keep a minimum distance of 20 cm between
the device and pacemakers or implanted defibrillators.
Persons with pacemakers or implanted defibrillators
must not carry the device in their breast pocket.
