Trotec 3510006031 Operating Manual Download Page 16

16

EN

pyrometer controlled via smartphone BP21WP

Disposal

Always dispose of packing materials in an environmentally
friendly manner and in accordance with the applicable local
disposal regulations.

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. You can also find out about other return options
that apply for many EU countries on the website 
https://hub.trotec.com/?id=45090. Otherwise, please contact an
official recycling centre for electronic and electrical equipment
authorised for your country.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

 In the European Union, batteries and accumulators must

not be treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Only for United Kingdom

According to Waste Electrical and Electronic Equipment
Regulations 2013 (SI 2013/3113) and the Waste Batteries and
Accumulators Regulations 2009 (SI 2009/890), devices that are
no longer usable must be collected separately and disposed of
in an environmentally friendly manner.

Declaration of conformity

We – Trotec GmbH – declare in sole responsibility that the
product designated below was developed, constructed and
produced in compliance with the requirements of the EU Radio
Equipment Directive in the version 2014/53/EU.

Product model/Product:

BP21WP

Product type:

pyrometer controlled via
smartphone

Year of manufacture as of:

2019

Relevant EU directives:

2001/95/EC: 3 December 2001

2014/30/EU: 29/03/2014

Applied harmonised standards:

EN 61326-1:2013

Applied national standards and technical specifications:

EN 300 328 V2.1.1:2016-11

EN 301 489-1 Draft Version 2.2.0:2017-03

EN 301 489-17 Draft Version 3.2.0:2017-03

EN 61010-1:2010

EN 62479:2010

Manufacturer and name of the authorised representative of
the technical documentation:

Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: [email protected]

Place and date of issue:
Heinsberg, 

22.07.2019

Detlef von der Lieck, Managing Director

Summary of Contents for 3510006031


















Reviews: