P5
3. CANOPY INSTALLATION
4. BLADE INSTALLATION
1
2
Attach blade to blade holder with 4 blade screws and 4 flat washers provided from hardware bag.
Make sure all screws are firmly tightened.
Remove 3 motor stoppers by removing screws.
Secure Blade Assembly to the motor with 2 motor screws provided from hardware bag.
To prevent wobble, do not bend blade or blade holder.
NOTE:
1
2
3
Spring Tab
Center Hole
Canopy Set Screw (4)
Blade
Blade Screw (4)
Blade Holder
Flat Washer (4)
1
Push up the canopy till center hole of canopy is engaged with spring tab of mounting bracket.
Secure canopy to mounting bracket with four canopy set screws and
provided
from hardware bag for further security.
Spring Washers
1
2
Motor screw (2)
3
Motor
Stopper (3)
2
Blade Assembly
Fan assembly
Mounting Bracket
Canopy
Spring Washer (4)
Switch Housing Cover
1
5.
INSTALLATION
SWITCH HOUSING
2
Fan Assembly
Switch Housing
Remove 3 set screws from switch housing cover and keep them for Step
.
Fasten switch housing and the cover together with 3 set screws removed from Step
.
1
2
1
2
Screw (3)
Screw (3)
