Page 4 of 15
24-Feb-12
Industry Canada Notice to users and operators:
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne
causant des réglements d’équipement. L’opération est sujette aux deux conditions suivantes : (1) cet
dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n’importe quelle
interférence reçue, y compris l'interférence qui peut causer l’opération peu désirée.
This device has been designed to operate with the antennas listed. Antennas not included or having a
gain greater than 7.4 dBi in the 2.4 GHz band are strictly prohibited for use with this device. The
required antenna impedance is 50 Ohms.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation
of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that permitted for successful
communication.
Required labeling
The Federal Communications Commission (FCC) and Industry Canada (IC) require equipment that
contains a Tropos 1410-B to have a label on the outside of the product that shows the FCC and IC ID
numbers. The label should say the following:
Contains:
FCC ID P9J-142401
IC ID 4751A-142401
