Page 11 of 15
24-Feb-12
Antennas
Antennas for the 1410-B can be purchased from Tropos or sourced by the integrator. The 1410-B is
designed for use with two 7.4 dBi monopole antennas.
Note: The 1410-B is FCC and Industry Canada approved for use with monopole antennas with a gain of
7.4 dBi or less. Please consult Tropos for any applications requiring other antennas.
It is preferable to mount the antennas outside of the device enclosure, but antennas can be located
inside of an enclosure if the enclosure is non-metallic. Antennas should be mounted as high as possible
and can be mounted remotely from the device.
The standard antenna connectors on the 1410-B main board are SMA connectors.
The connection from the antenna connectors on the 1410-B and any antenna connectors on the device
should be made with low-loss coaxial cable. Tropos recommends LMR-240 or better cable.
Figure 2
LED and Switch Detail
