6
AMD-53-S2 MODULATOR / MULTIPLEXER
3.5. SETTINGS FOR THE ETHERNET NETWORK INTERFACE
Allocation of IP address, default : 10.10.10.20
One-time at the start an IP address via a DHCP server is requested. If the probe fails, will use the default
IP address.
The default IP address is used.
IP-Address: [0.0.0.0 ... 10.10.10.20 ... 255.255.255.255]
A default IP address for the case that “use DHCP“ is set to “OFF“, or no DHCP server could be reached.
IP-Subnetmask: [0.0.0.0 ... 255.255.255.0 ... 255.255.255.255]
The mask corresponding to the IP address.
IP-Gateway: [0.0.0.0 .. 255.255.255.255]
A default IP address for the device to a possibly active exploitation of a gateway in the network.
SNMP Trap IP-Addr: [0.0.0.0 .. 255.255.255.255] IP address to a possible used SNMP trap manager.
Network Time Protocol (NTP)
is a networking protocol for clock synchronization between computer
systems over IP. NTP is intended to synchronize all participating computers to Coordinated Universal
Time (UTC). You must specify the URL of NTP Server that will synchronize the current time, which will be
indicated in the
and on the subscribers set-top-boxes.
Time and Date Table (TDT)
(TDT) provide a time reference for the stream. The TDT contains the current UTC time. The
Modulator/MUX does not have its own real-time clock. Therefore, if you turned “ON” the function of
forming TDT (in SI GENERATOR menu, see page No.11), then you need to provide a connection to the
Internet.
INSTRUCTION MANUAL
