9
AMD-53-S2 MODULATOR / MULTIPLEXER
3.8. INPUTS
The 120 possible logical stream channels can be defined as a multi-program stream or single
program stream and can be operated according to the IP address space specified in multicast mode
or unicast.
In the first step, the IP address, netmask and gateway address of stream sources are assigned to
the ETHERNET interface for use in the local network. And Port number of streams are
individualized! The SOURCE settings can be made separately for each stream channel. The port
number must be unique and can not be repeated! After the source of the transport stream has been
connected to the ETHERNET switch of the local network, you must press the “+” button and enter
the port number of source. The information about the number of programs found on a specific port is
displayed in the “Programs” column. In the event that there is no correct transport stream on any
port, the icon with a rotating scale is displayed in the “Programs” column. Check the correspondence
between the port number and the network parameters of the source and modulator input!
3.8.1. IP-INPUT mode
(without DEMUX/MUX processing). The data enters the modulator without
any preliminary processing. In this mode, data is received from only one port, except for specific
cases.
Unicast packets receiving
Multicast packets receiving
INSTRUCTION MANUAL
