10
Operation
CHARGING THE BATTERY
1. Plug the charger into an AC outlet 120V (normal household
voltage).
2. Insert the battery into the slots of the charger and slide into place
until the battery locks into place
3. The LED will flash green while the battery is charging. Once the
battery is fully charged, the LED indicator will show a steady
green light.
4. Remove the battery by pressing and holding the latch button and
sliding out of the charger. Lithium Ion batteries have no memory
effect – a partial charge will not damage your battery.
STATUS INDICATOR LIGHTS
The LED light indicates the operating status and the state of charge
of the battery.
- LED steady red – the charger is ready to charge, but no battery is
connected
- LED flashes green. Battery is charging.
- LED steady green: The battery is fully charged and can be
removed.
- LED flashes red: battery fault or overheated.
If the charger is plugged in and no LED lights are illuminated,
unplug and check with your nearest authorized service center.
Do not attempt to use the charger.
To avoid the risk of damage and injury, only use the charger to
recharge Trophy Strike 120V battery packs. Never try to recharge
non-rechargeable batteries.
STORAGE OF THE CHARGER AND BATTERY
For long-term storage, it is preferable that the battery is fully
charged and stored in a dry place at a temperature between
50 - 77 °F (10 -25° C).
The charger should be stored in the same conditions as the
battery, taking care that no foreign objects such as metal chips
enter through the ventilation slots of the charger or short out the
connectors on the battery. Only use the supplied charger and
batteries with this tool.
!
WARNING
