TRONXY X6-2E, Instructions Manual

Page: 17 / 25

and click the icon to send the materials to the nozzle to flow the
materials.Click the icon motor to stop.Single side feed can not be
too long,Avoid plugging the hot material into the cold end of E2.E2
motor filaments feed back and forth.changed to E2，click
filaments return，click filamenst in。
and press down the feeder pressing block. As shown in the figure, pass
the filaments through the feeder to the material pipe,
3.4Leveling menu, auto leveling function, click the icon to enter auto
leveling.The machine reads the parameters of the leveling point and
saves them.Automatic leveling function selection.This function is not
available on this machine.