feeding tube
2. Cut the decorative strip to the appropriate length and press it
into the aluminum profile groove, as shown in the figure.
Assemble material specification and quantity：
3d printer 1set
Decorative strip 1 roll
feed tubeΦ4 1pcs
Print platform sticker 1pcs
3. Place the print platform sticker on the heatbed.
1. Pull the feeding tube into the air nozzle hole of the feeding
component, press down the plastic outer ring of the air nozzle,
insert the feeding tube, loosen the plastic ring and jam the feeding
tube, as shown in the figure.Make sure the material tube is
jammed.Then put the other end of the feeding tube into the air
nozzle of the printing head assembly and confirm that the feeding
tube is tightened.
Step 14: decorative strip and feeding tube, lattice glass assembly
